www.industryarchive.org - B2B Resources & Solutions Community for B2B Professionals
Posted by Inverter.Com on 03/03/2020 in Pumps

3 Phase Centrifugal Pump with 5 HP Motor Power


With compact close coupled electric motor driven utility pump and rugged cast iron casing, is commonly applied for water circulation, booster service, liquid transfer, spraying systems and high-rise building water service.

This 5 horsepower pump end has a maximum flow of 15.3m3/h (67.4 GPM) and a maximum head of 45.8m (150ft). 2" FIPT Suction, 2" FIPT Discharge. Y/Y2 series motor required.


Power5 hp (4kW)
Phase3 phase
Input voltage *AC 220V, 230V, 240V, 380V, 400V, 415V, 440V, 460V, 480V
Input frequency *50Hz, 60Hz
Flow (min. flow to max. flow)8.3m3/h (36.5 GPM, American system)11.7m3/h (51.5 GPM, American system)15.3m3/h (67.4 GPM, American system)
Head (max. head to min. head)45.8m (150ft)44m (144ft)42m (138ft)
Inlet diameter50mm (2 inches)
Outlet diameter50mm (2 inches)
Installation angle of outlet0°, 90° and 180°
Nominal diameter of impeller200mm
Pump typeBooster pump
Number of stagesSingle-stage
Motor typeY/Y2 series motor
Motor speed2900rpm
Impeller material304/316 stainless steel
Seal material304 stainless steel, tungsten carbide, fluorine rubber
Inlet max. pressure1MPa (145 psi)
UsageWater, or liquids compatible with pump component materials.
1. The volume of solid particles should be less than 0.1% in unit volume, and the granularity should be less than 0.2mm.
2. The temperature should be lower than 60℃.
EnvironmentTemperature: <40℃, humidity: <95%, altitude<1000m
Warranty12 months

For more details about centrifugal pumps click here:
Want to know more about centrifugal pump and water pump through videos click here:

Source B2B Products & Services Search

Contact Inverter.Com